Overview
The Honeywell 80366195-100, also cataloged as the MU-TAIH22 Analog Input Module, provides analog field-signal interfacing within Honeywell TPS and Experion PKS I/O architectures. The module connects field instrumentation to the associated I/O subsystem through compatible termination hardware and system backplane interfaces.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MU-TAIH22 |
| Part Number | 80366195-100 |
| Brand | Honeywell |
| Product Type | Industrial Analog Input Module |
| Application | Honeywell DCS / Process Control |
| System Compatibility | Honeywell TPS / Experion PKS |
| Signal Interface | Analog field signal interface |
| Field Connection | Compatible Honeywell termination assembly |
| Communication | I/O subsystem / control-system backplane interface |
| Mounting | Compatible Honeywell I/O subsystem or carrier |
| Signal Processing | Analog field signal acquisition |
| Installation Environment | Industrial process-control environment |
Process Instrumentation Signal Interface
The MU-TAIH22 operates within the Honeywell process-control I/O architecture and receives analog field signals through the associated termination hardware. Therefore, engineers should verify the configured signal type, channel assignment, and termination arrangement before commissioning.
For field loops using 4-20 mA HART, the host I/O architecture must provide the required HART communication path. The supplied information does not confirm HART capability for this specific module, so the installed hardware revision and system documentation should determine compatibility.
The installation should also maintain proper channel separation, shield termination, and signal-cable routing. Consequently, field wiring should follow the approved Honeywell system drawings rather than relying on generic terminal assignments.
Frequently Asked Questions (FAQ)
Q: Does the 80366195-100 support 4-20 mA HART signals?
A: The supplied specifications identify an analog field-signal interface but do not confirm HART functionality. Verify the exact I/O configuration and hardware documentation before connecting HART instruments.
Q: Can the MU-TAIH22 operate without compatible termination hardware?
A: The supplied information specifies field connection through compatible termination hardware. Therefore, installation should use the termination assembly defined for the installed Honeywell I/O architecture.
Q: Are the module dimensions, power consumption, and operating temperature specified?
A: No. The supplied data does not provide verified values for these parameters. Engineers should obtain the values from the applicable Honeywell hardware documentation or the module identification data.
Field Installation Guidelines
- Verify the complete 80366195-100 / MU-TAIH22 identification before installation.
- Confirm compatibility with the installed Honeywell TPS or Experion PKS I/O subsystem.
- Isolate applicable field power before removing or installing the module.
- Verify the termination assembly and terminal assignments against approved drawings.
- Confirm the configured analog signal type before connecting field instrumentation.
- Route analog signal wiring separately from high-voltage and high-noise conductors where required by site standards.
- Terminate cable shields according to the approved Honeywell grounding design.
- Confirm channel assignments in the control-system engineering database.
- Check module seating, termination connections, and field wiring before energization.
- Verify the input signal at the control-system level after installation.
- Review module diagnostics before returning the associated process loop to service.
Reviews
There are no reviews yet.