Overview
Configured for UCN / VCN node-to-network connectivity, the Honeywell 51195153-005 (MU-NKD005 UCN / VCN Drop Cable Set) provides a 5 m RG-6 coaxial cable assembly for physical network signal transmission within Honeywell DCS infrastructure.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MU-NKD005 |
| Part Number | 51195153-005 |
| Alternate Part Number | 51195153005 |
| Brand | Honeywell |
| Product Type | UCN / VCN RG-6 Drop Cable Set |
| Cable Type | RG-6 Coaxial Cable |
| Cable Length | 5 m |
| Network Application | Honeywell UCN / VCN |
| Primary Function | Drop connection between network infrastructure and a control-system node |
| Signal Interface | Coaxial cable interface |
| Approximate Weight | 0.28 kg |
| Dimensions | Cable assembly length: 5 m; other dimensions not specified |
| EMI Consideration | Coaxial construction provides shielding against external electromagnetic interference |
Honeywell DCS Network Cable Characteristics
The MU-NKD005 carries network signals through an RG-6 coaxial cable assembly rather than performing active signal processing. Therefore, the cable does not require a local power supply or backplane current.
For Honeywell UCN / VCN installations, the assembly provides a physical drop connection between the network path and the associated control-system node. The 5 m cable length defines the supplied connection length and should be considered during cabinet and network-layout planning.
In addition, the coaxial construction places the signal conductor and shield within a controlled cable geometry. Proper connector installation and shield continuity therefore remain important for maintaining the intended signal path.
Frequently Asked Questions
Q: Does the MU-NKD005 require an external power supply?
A: No. The supplied unit is a passive RG-6 cable assembly and has no specified power consumption.
Q: What is the specified cable length?
A: The specified cable length is 5 m.
Q: Can the cable length or electrical characteristics be extended beyond the supplied specification?
A: The supplied data specifies a 5 m RG-6 assembly but does not define permissible extension methods or additional electrical limits. Any modification should follow the applicable Honeywell UCN / VCN installation documentation.
Field Installation Guidelines
- Verify the MU-NKD005 model and part number before installation.
- Route the coaxial cable away from high-current power conductors where practical.
- Avoid excessive bending, crushing, abrasion, or mechanical tension along the cable route.
- Maintain connector integrity throughout installation and verify that each connection is fully seated.
- Preserve shield continuity across the complete cable path.
- Separate network cabling from known high-noise sources where the cabinet layout permits.
- Do not modify the supplied cable length unless the applicable Honeywell installation documentation explicitly permits the modification.
- Inspect the cable jacket and connectors for mechanical damage before commissioning.
- After installation, verify network communication and investigate abnormal signal behavior before placing the associated control-system node into service.
Reviews
There are no reviews yet.