Overview
Moreover, the two-wire loop-powered design simplifies installation while maintaining stable signal performance in industrial operating conditions.
Therefore, maintenance teams trust this Seismoprobe for continuous machinery health monitoring and early fault detection strategies.
Specification
| Parameter | Specification |
|---|---|
| Product Model | 9200-03-05-10-00 |
| Manufacturer | Bently Nevada |
| Product Type | Two-wire velocity Seismoprobe transducer |
| Measurement Principle | Electromagnetic velocity sensing |
| Measured Variable | Machinery casing vibration velocity |
| Output Signal | Loop-powered dynamic velocity signal |
| Transducer Mounting Angle / Min Frequency | 90° ±2.5°, 4.5 Hz (270 cpm) |
| Connector / Cable Option | Terminal block, top mount, no integral cable |
| Cable Length (if integral cable option chosen) | N/A for this configuration; optional 10–50 ft (3.0–15.2 m) custom lengths |
| Mounting Base Option | Circular base with M10 × 1 stud |
| Electrical Interface | Two-wire connection, loop-powered |
| Power Supply | Supplied via vibration monitoring system loop |
| Frequency Response | Suitable for standard rotating machinery vibration ranges |
| Sensitivity | Factory-calibrated for consistent velocity measurement |
| Housing Material | Industrial-grade rugged metal enclosure |
| Environmental Rating | Continuous operation in industrial conditions |
| Operating Temperature | Typical industrial range (-40°C to +120°C) |
| Shock / Vibration Tolerance | Meets machinery protection system requirements |
| Agency Approval | No hazardous area approvals |
| System Compatibility | Bently Nevada 9200 vibration monitoring and protection systems |
| Typical Installation | Direct mounting on machine casing; axial or radial orientations possible |
| Maintenance Requirements | Minimal, no routine recalibration required |
| Expected Service Life | Designed for long-term industrial operation under harsh conditions |
| Applications | Pumps, motors, compressors, turbines, fans, auxiliary rotating machinery |
FAQ
It measures machinery casing vibration velocity and outputs a proportional electrical signal for monitoring systems.Q2: What mounting angle does this configuration use?
This model uses a 90-degree mounting angle with a minimum operating frequency of 4.5 Hz.
Q3: Does this Seismoprobe include an integral cable?
No, it uses a top-mounted terminal block connection without an attached cable.
Q4: Is this model compatible with Bently Nevada monitoring systems?
Yes, it integrates directly with Bently Nevada vibration monitoring and machinery protection platforms.
Q5: What industries commonly use this Seismoprobe?
It is widely used in power generation, oil and gas, petrochemical, and general industrial applications.
Reviews
There are no reviews yet.