Overview
Moreover, its two-wire, loop-powered design ensures consistent signal output while simplifying installation in complex industrial environments.
Therefore, engineers rely on this transducer for predictive maintenance, early fault detection, and continuous condition monitoring.
Specification
| Parameter | Specification |
|---|---|
| Product Model | 9200-01-02-02-00 |
| Manufacturer | Bently Nevada |
| Product Type | Two-wire velocity Seismoprobe transducer |
| Measurement Principle | Electromagnetic velocity sensing |
| Measured Variable | Machinery casing vibration velocity |
| Output Signal | Loop-powered dynamic velocity signal |
| Transducer Mounting Angle / Min Frequency | 45° ±2.5°, 4.5 Hz (270 cpm) |
| Connector / Cable Option | Integral hardline cable, 2 ft (0.6 m) standard |
| Electrical Interface | Two-wire connection, loop-powered |
| Mounting Base Option | Circular base with 1/4-20 UNC stud |
| Housing Material | Industrial-grade rugged metal enclosure |
| Environmental Capability | Continuous operation under harsh industrial conditions |
| Frequency Response | Optimized for low-frequency machinery vibration detection |
| Sensitivity | Factory-calibrated for consistent velocity measurement |
| Agency Approval | CSA approved |
| System Compatibility | Bently Nevada 9200 vibration monitoring and protection systems |
| Typical Installation | Direct mounting on machine casing surfaces |
| Maintenance Requirements | Minimal; no routine recalibration required |
| Expected Service Life | Long-term operation under industrial vibration and temperature extremes |
| Applications | Pumps, motors, compressors, turbines, fans, and auxiliary rotating machinery |
FAQ
It measures machinery casing vibration velocity and outputs a proportional electrical signal.
Q2: What mounting angle and frequency does this configuration provide?
This model uses a 45° ±2.5° mounting angle with a minimum operating frequency of 4.5 Hz.
Q3: Does this Seismoprobe include a cable?
Yes, it includes a 2-foot integral hardline cable for reliable installation.
Q4: Is this model compatible with Bently Nevada monitoring systems?
Yes, it integrates directly with Bently Nevada 9200 vibration monitoring and protection platforms.
Q5: Which machinery commonly uses this transducer?
It is widely applied on pumps, motors, compressors, turbines, fans, and auxiliary rotating machinery.
Reviews
There are no reviews yet.