Overview
Moreover, its two-wire loop-powered design reduces wiring complexity while maintaining reliable signal performance in industrial environments.
Therefore, engineers frequently choose this transducer for continuous condition monitoring and early fault detection programs.
Specification
| Parameter | Specification |
|---|---|
| Product Model | 9200-01-01-10-00 |
| Manufacturer | Bently Nevada |
| Product Type | Two-wire velocity Seismoprobe transducer |
| Measurement Principle | Electromagnetic velocity sensing |
| Measured Variable | Machinery casing vibration velocity |
| Output Signal | Loop-powered dynamic velocity signal |
| Transducer Mounting Angle / Min Frequency | 0° ±2.5°, 4.5 Hz (270 cpm) |
| Connector / Cable Option | Integral hardline cable, 10 ft (3.0 m) standard |
| Electrical Interface | Two-wire connection, loop-powered |
| Mounting Base Option | Circular base with 1/4-20 UNC stud |
| Housing Material | Industrial-grade rugged metal enclosure |
| Environmental Capability | Continuous operation in industrial conditions |
| Frequency Response | Optimized for low-frequency vibration detection |
| Sensitivity | Factory-calibrated for consistent velocity measurement |
| Agency Approval | No hazardous area approvals |
| System Compatibility | Bently Nevada 9200 vibration monitoring and protection systems |
| Typical Installation | Direct mounting on machine casing surfaces |
| Maintenance Requirements | Minimal; no routine recalibration required |
| Expected Service Life | Long-term operation under harsh industrial conditions |
| Applications | Pumps, motors, compressors, turbines, fans, and auxiliary rotating machinery |
FAQ
It measures machinery casing vibration velocity and outputs a proportional electrical signal for monitoring systems.
Q2: What mounting angle and frequency range does this model provide?
This model uses a 0° ±2.5° mounting angle with a minimum operating frequency of 4.5 Hz.
Q3: Does this Seismoprobe include a cable?
Yes, it comes with a standard 10-foot integral hardline cable.
Q4: Is this model compatible with Bently Nevada monitoring systems?
Yes, it integrates directly with Bently Nevada vibration monitoring and protection platforms.
Q5: What machinery typically uses this transducer?
It is widely used in pumps, motors, compressors, turbines, fans, and auxiliary rotating equipment.
Reviews
There are no reviews yet.