Overview
Configured for digital input signal acquisition in the ABB Bailey / Digital Infi 90 system, the ABB NTU-715 SM9-3055.051.00 (NTU-715 Input Slave Module) provides direct electrical interfacing between field binary signals and the control system. The module processes up to 16 binary input signals and operates from a 24 VDC supply. It supports replacement and maintenance activities within compatible ABB Bailey automation installations.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | NTU-715 SM9-3055.051.00 |
| Base Model | NTU-715 |
| Brand | ABB |
| Product Type | Input Slave Module |
| Compatible System | ABB Bailey / Digital Infi 90 |
| Input Type | Binary Input |
| Input Channels | 16 |
| Operating Voltage | 24 VDC |
| Enclosure Protection | IP20 |
| Origin | Sweden |
| Weight | Approximately 0.71 kg to 0.82 kg |
| Operating Temp | -20 deg C to +60 deg C |
| Installation Application | Industrial automation control system |
ABB Backplane Bus and I/O Density Configuration
The NTU-715 SM9-3055.051.00 operates as a field input interface within the ABB Bailey / Digital Infi 90 automation architecture. Its 16 binary input channels provide concentrated signal acquisition for multiple field contacts or discrete devices.
In addition, correct system integration depends on compatibility with the installed module position and associated ABB system hardware. The input module configuration should therefore match the existing system architecture before installation. I/O density scaling within the control system depends on the available hardware configuration and supported system capacity.
Frequently Asked Questions
Q: How many input channels does the ABB NTU-715 SM9-3055.051.00 provide?
A: The module provides 16 binary input channels for acquiring discrete field signals.
Q: What operating voltage does the NTU-715 require?
A: The provided technical data specifies an operating voltage of 24 VDC.
Q: Can the NTU-715 SM9-3055.051.00 be installed in any ABB automation system?
A: No. The module is specified for compatibility with ABB Bailey / Digital Infi 90 system hardware. Verify the installed rack, module interface, and system configuration before installation.
Field Installation Guidelines
Disconnect or isolate system power according to the applicable site procedures before removing or installing the module.
Install the NTU-715 SM9-3055.051.00 only in hardware positions designed for compatible ABB Bailey / Digital Infi 90 equipment. Verify the module orientation and connector alignment before applying mechanical force.
Route binary input wiring separately from high-current power conductors and switching circuits where practical. In addition, use the site’s specified grounding and shielding practices to reduce electrical interference.
Verify the 24 VDC supply and field signal wiring before system energization. After installation, check each input channel through the applicable control system diagnostics or commissioning procedure.
ABB Top Products
Customers Also Viewed
Contact: Manski Wong +86 18030205725 manski@cambia.cn
Reviews
There are no reviews yet.