Overview
Configured for field power injection and distribution in ABB Select I/O systems, the ABB PTB810 (3BSE080332R1) (PTB810 Power Injection Terminal Block) provides direct electrical connection for supplying field power across associated I/O circuits. The terminal block uses DIN rail mounting and screw terminal connections for panel installation and field wiring.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | PTB810 (3BSE080332R1) |
| Brand | ABB |
| Product Type | Power Injection Terminal Block |
| Series | ABB Select I/O |
| Catalog / Part Number | 3BSE080332R1 |
| Rated Voltage | Up to 690 V |
| Rated Current | 32 A |
| Mounting Type | DIN rail mounting |
| Connection Type | Screw terminals |
| Housing Material | High-impact resistant, high-grade thermoplastic |
| Flammability Rating | UL 94 V-0 |
| Weight | Approx. 0.08 kg |
| Dimensions | Approx. 73 mm x 36 mm x 28 mm |
| Operating Temp | -40 deg C to +70 deg C |
| Storage Temp | -40 deg C to +85 deg C |
| Relative Humidity | 5 % to 95 %, non-condensing |
| Operating Altitude | -1000 m to 5000 m, with restrictions |
| Ingress Protection | IP20 |
| Power Consumption | Not specified; passive terminal block with no active power consumption |
ABB Industrial I/O Integration Characteristics
The PTB810 (3BSE080332R1) supports physical field power distribution within the ABB Select I/O installation structure. Its terminal arrangement provides a defined connection point for power injection before distribution to associated field circuits.
In addition, DIN rail mounting supports structured panel assembly and I/O density scaling. The terminal block does not perform backplane bus communication or active signal processing. Therefore, system communication performance depends on the connected ABB I/O hardware rather than the PTB810 terminal block itself.
Frequently Asked Questions
Q: Does the ABB PTB810 (3BSE080332R1) consume operating power?
A: The PTB810 is a passive power injection terminal block. The provided data does not specify internal power consumption because the unit does not perform active processing or communication.
Q: How is the PTB810 (3BSE080332R1) installed?
A: The unit mounts on a compatible DIN rail and uses screw terminals for electrical field connections. Installation should follow ABB panel layout and terminal torque requirements.
Q: Can the PTB810 (3BSE080332R1) provide active I/O signal processing?
A: No. The terminal block provides physical power injection and distribution. Signal acquisition, processing, and communication remain functions of the connected Select I/O modules and system interfaces.
Field Installation Guidelines
Install the ABB PTB810 (3BSE080332R1) on a properly secured DIN rail within a suitable electrical enclosure. Verify that the mounting rail and enclosure arrangement provide adequate mechanical support and environmental protection.
Disconnect and isolate applicable power sources before connecting or removing field wiring. Use conductors suitable for the voltage, current, temperature, and installation environment.
Route power wiring separately from sensitive signal and communication cables where practical. In addition, maintain orderly cable routing to reduce mechanical stress on screw terminals.
Tighten terminal connections according to the applicable ABB installation documentation. Do not exceed the terminal’s approved conductor size or connection torque.
Because the enclosure rating is IP20, provide additional protection against accidental contact, contamination, moisture, and conductive debris through the control cabinet or enclosure design.
ABB Top Products
Customers Also Viewed
Contact: Manski Wong +86 18030205725 manski@cambia.cn
Reviews
There are no reviews yet.