Overview
Configured for PN800 Plant Network communication in the HPC800 platform, the ABB CP800 (CP800 Communication Processor Module) provides direct physical and electrical execution of network communication functions. The module interfaces with the HPC800 architecture and operates from a 24 VDC power source. It uses a 2-pin pluggable screw terminal for power connection and includes a button cell.
Suffix Breakdown & Model Matrix
The supplied documentation identifies CP800 as a fixed model designation. No additional suffix or ordering-code breakdown is provided; therefore, no model matrix is inferred.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CP800 |
| Brand | ABB |
| Product Type | Communication Processor Module |
| System Platform | HPC800 |
| Network Function | PN800 Plant Network Communications |
| Origin | Sweden |
| Weight | 0.25 kg |
| Dimensions | 5.3 x 10.8 x 11.8 cm |
| Operating Voltage | 24 VDC |
| Power Consumption | 3.5 W typical |
| Current Consumption | 150 mA at 24 VDC typical |
| Isolation | 500 VDC power-to-earth |
| Power Supply Connection | 2-pin pluggable screw terminal |
| Operating Temp | -20 deg C to +60 deg C |
| Storage Temperature | -40 deg C to +85 deg C |
| Humidity | 5-95% RH, non-condensing |
| Internal Component | Button cell |
Industrial Network and Firmware Compatibility
The ABB CP800 supports the communication architecture required for PN800 Plant Network operation within the HPC800 platform. Network processor installation requires compatibility between the module hardware and the installed system firmware. Therefore, firmware versions and system configuration should be checked before commissioning or replacement.
The module also requires correct power-to-earth isolation and controlled cable routing. Keep communication wiring separated from high-current power conductors where practical. In addition, maintain proper shield termination according to the system installation requirements to reduce electrical interference on network connections.
Frequently Asked Questions
Q: What power supply does the ABB CP800 require?
A: The CP800 operates from a 24 VDC power supply and has a typical current consumption of 150 mA.
Q: What is the power-to-earth isolation rating?
A: The module provides 500 VDC power-to-earth isolation.
Q: Can the CP800 operate outside a controlled cabinet environment?
A: The specified operating temperature range is -20 deg C to +60 deg C, with 5-95% RH non-condensing humidity. Installation should also follow the environmental requirements of the HPC800 system enclosure.
Field Installation Guidelines
Disconnect or isolate system power according to the applicable site procedure before installing or removing the module. Mount the CP800 only in the designated HPC800 hardware position and verify the mechanical connection before applying power.
Connect the 24 VDC supply through the specified 2-pin pluggable screw terminal. Confirm supply polarity and inspect the wiring for loose connections before energizing the system.
Route communication cables separately from high-current switching and power conductors where possible. Apply shield grounding according to the PN800 and HPC800 installation requirements. After installation, verify module recognition, network communication status, and firmware compatibility through the applicable system configuration tools.
ABB Top Products
Customers Also Viewed
Contact: Manski Wong +86 18030205725 manski@cambia.cn
Reviews
There are no reviews yet.