Configured for discrete electrical actuation in Modicon X80 backplane-based control systems, the Schneider Electric BMXSDO0802 (BMXSDO0802 discrete output module) provides direct 24 VDC switching for field loads via 8 solid-state sourcing channels. The module operates as a non-isolated output stage with positive logic execution across distributed PLC I/O architectures.
Suffix Breakdown & Model Matrix
No suffix segmentation is defined for BMXSDO0802. The identifier represents a single cataloged hardware configuration within the Modicon X80 discrete output module family.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | BMXSDO0802 |
| Brand | Schneider Electric |
| Origin | Not specified in source data |
| Weight | 0.12 kg (net) |
| Dimensions | 2.5 cm x 10.2 cm x 7.6 cm |
| Operating Temp | France |
| Power Consumption | 4.4 W |
| Product Type | Discrete Output Module |
| Output Channels | 8 |
| Output Type | Solid state, non-isolated |
| Output Logic | Positive |
| Rated Output Voltage | 24 VDC (19 to 30 VDC) |
| Output Current | 0.5 A per channel |
| Max Module Current | 10 A |
| Response Time | 1.2 ms |
| Backplane Consumption | 3.3 VDC: 264 mA |
Industrial Control Backplane Integration Characteristics
Within Schneider Electric Modicon X80 architectures, the BMXSDO0802 interfaces through the rack backplane bus, where I/O exchange is handled via deterministic internal communication cycles. Output channel density scaling is achieved through modular slot expansion, allowing multiple discrete modules to coexist on a shared backplane without external wiring arbitration. Firmware and module identification are handled at system initialization, enabling automatic I/O mapping within the controller configuration environment. Electrical output stages are protected via integrated current limiting, short-circuit detection, and transil-based overvoltage suppression to maintain stable switching behavior under inductive or resistive load transitions.
Frequently Asked Questions (FAQ)
Q: Can BMXSDO0802 outputs be paralleled for higher load capacity?
A: Yes. Up to 2 channels can be paralleled, subject to current balancing constraints and external wiring symmetry.
Q: What is the backplane current requirement during full channel activation?
A: The module draws approximately 264 mA at 3.3 VDC logic supply, independent of output load current, which is sourced externally at 24 VDC.
Q: Is hot-swap insertion supported in Modicon X80 racks?
A: Hot-swap capability depends on rack and CPU configuration; electrical output states default to safe condition during module insertion or removal.
Field Installation Guidelines
Maintain 24 VDC supply within 19 to 30 VDC tolerance window and ensure correct polarity at field terminals. External protection requires a 2 A fuse per output group for short-circuit limitation compliance. Shielded cabling is recommended for inductive loads, with termination at a single-point earth ground to avoid loop current formation. Avoid exceeding 0.5 A per channel continuous loading, and verify transient suppression for coil-based actuators. Ensure backplane connectors are fully seated before energization to prevent partial contact heating.
Schneider Top Products
| Modicon Quantum | Modicon X80 | Modicon Quantum |
| 140DDI84100 | BMXDDI1602 | TSXAEY800 |
| 140DDO84300 | BMXNOM0200 | TSXDSY32T2K |
| 140DDO35300 | BMXAMO0410 | TSXSCP114 |
| 140CHS11000 | BMXAMI0810 | TSXP571634M |
| 140ACI03000 | BMXDDO3202K | TSXDEY32D2 |
| 140ACI04000 | BMXAMO0802 | TSXDSY32T2 |
| 140ACO13000 | BMXCPS2000 | TSXDET3242 |
| 140CRA93200 | BMXCPS2010 | TSXDST1682 |
| 140CPU65150 | BMXCPS3020 | TSXP47425 |
| 140CPU67160 | BMXCPS3500 | TSXP57303AM |
Reviews
There are no reviews yet.