Overview
Specification
| Category / Parameter | Specification / Description |
|---|---|
| Manufacturer | ABB (ASEA Brown Boveri) |
| Model / Part Number | SDCS‑IOE‑2, DCF1208097R0001 |
| Product Type | Measurement / I/O Expansion / Input‑Output Extension Board |
| System Compatibility | Compatible with ABB SDCS DC‑drive systems / legacy ABB DCS‑drive platforms |
| Function / Purpose | Signal measurement, conditioning and I/O expansion — supports analog and/or digital inputs and outputs depending on configuration |
| Signal Types Supported | Analog and digital signals — actual channel counts and configuration depend on system setup |
| Supply Voltage | 24 V DC ±20% typical (provided via drive control unit) |
| Mounting / Connector Style | Internal board mounting within drive/control cabinet (standard SDCS board form factor) |
| Dimensions | Approx. 150 × 120 × 20 mm |
| Weight (Net / Typical) | Around 0.25 kg (some variants up to ~0.5 kg) |
| Operating / Ambient Temperature Range | –20 °C to +60 °C (some variants –10 °C to +70 °C) |
| Humidity / Environmental Conditions | Suitable for industrial environments — 5%–95% relative humidity non‑condensing |
| I/O Capacity / Configuration | Provides additional I/O capability beyond base drive controller; supports expansion of both analog and digital channels (exact counts depend on system and configuration) |
| Connector / Interface Type | Multi‑pin board connectors / internal terminals compatible with ABB SDCS cabinet wiring scheme |
| Signal Conditioning / Processing | Preserves signal integrity and handles measurement signals reliably in demanding industrial environments |
| Usage / Mounting Context | Inside drive/control cabinet; compatible with retrofit and legacy systems where I/O expansion or measurement board upgrade is needed |
| Part Origin / Quality | Genuine ABB spare part, new in original packaging, with standard industrial quality controls |
FAQ
A: It expands the number of available input/output channels, allowing addition of extra sensors, digital controls or actuators to the drive or automation system.
Q: Does it support both analog and digital signals?
A: Yes — depending on configuration, the module can handle both analog and digital inputs and/or outputs for flexible signal interfacing.
Q: Can SDCS-IOE-2 be used in older ABB DC drive systems?
A: Yes — it commonly serves as an expansion board for legacy SDCS DC drive systems such as DCS500 or DCS800.
Q: Is special installation required?
A: Installation typically involves board‑level mounting inside the drive control cabinet or existing drive enclosure; minimal mechanical rework is needed when integrated properly.
Manual/Datasheet PDF
ABB Top Products
Customers Also Viewed
| Bently Nevada | ABB | Yokogawa | Woodward | Schneider |
| 133835-02 | SPS02 | SPS02 | 5501-365 | 140CPS12420 |
| 135321-01 | SPS03-5V | SPS03-5V | 5501-367 | 140NOE77101 |
| 135322-01 | SPS03-15V | SPS03-15V | 9907-031 | 140DAI55300 |
| 136751-01 | SPNIS21 | SPNIS21 | 5503-198 | 140CRP93100 |
| 136751-02 | SPBRC410 | SPBRC410 | 5464-658 | 140AVI03000 |
| 184139-10 | SPNPM22 | SPNPM22 | 9907-023 | 140CPS11420 |
| 82362-01 | SPDSO14 | SPDSO14 | 9907-162 | BMXDDI1602 |
| 84134-01 | SPFEC12 | SPFEC12 | 9907-028 | BMXNOM0200 |
| 87900-02 | SPDSI14 | SPDSI14 | 8200-1302 | BMXAMO0410 |
| 89998-01 | SPAS011 | SPAS011 | 8406-003 | BMXAMI0810 |
Reviews
There are no reviews yet.