Overview
Configured for Alternative Energy Bridge Interface functions in the Mark VIe control platform, the GE IS210AEBIH3B (IS210AEBI AE Bridge Interface) provides direct electrical interfacing for associated wind turbine control hardware. The module operates from a 24 VDC input supply and supports installation in environments from -30 deg C to +65 deg C with 0-95% non-condensing humidity.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS210AEBIH3B |
| Base Model | IS210AEBI |
| Brand | General Electric (GE) |
| Series | Mark VIe |
| Product Type | AE Bridge Interface |
| Functional Description | Alternative Energy Bridge Interface |
| Application | GE Wind Turbine Control Hardware |
| Input Voltage | 24 VDC |
| Operating Temp | -30 deg C to +65 deg C |
| Humidity | 0-95% non-condensing |
| Origin | USA |
| Weight | 0.52 kg |
| Dimensions | 4 x 18.6 x 26.1 cm |
| Manufacturer | General Electric |
| Tariff Code | 8537101190 |
| Place of Shipment | Xiamen, China |
Mark VIe Control Hardware Interface Characteristics
The IS210AEBIH3B interfaces with associated hardware within the GE Mark VIe platform. Therefore, installation must maintain correct connector alignment and secure mechanical engagement before system power is applied.
GE industrial control platforms use structured hardware communication and coordinated I/O architectures. Accordingly, interface modules must maintain compatible electrical connections with their designated system hardware. The available product data does not specify the internal communication rate, backplane current load, or firmware revision requirements for IS210AEBIH3B.
During replacement or commissioning, technicians should verify the complete model number IS210AEBIH3B and confirm compatibility with the installed Mark VIe hardware configuration.
Frequently Asked Questions
Q: What is the input supply requirement for the IS210AEBIH3B?
A: The IS210AEBIH3B uses a 24 VDC input supply. The available documentation does not specify its maximum input current or power consumption.
Q: What environmental conditions are specified for this module?
A: The specified operating temperature range is -30 deg C to +65 deg C. The permitted humidity range is 0-95% non-condensing.
Q: Can the IS210AEBIH3B be replaced with another AEBI model?
A: Replacement compatibility should be confirmed using the complete model number, hardware revision, connector arrangement, and installed Mark VIe system configuration. The supplied data does not define interchangeability between different AEBI revisions.
Field Installation Guidelines
- Disconnect or isolate system power according to site electrical procedures before installing or removing the module.
- Verify that the installed hardware matches the complete model number IS210AEBIH3B.
- Check the 24 VDC supply polarity and voltage condition before energizing the interface.
- Mount the module using the designated system hardware and avoid mechanical stress on connectors.
- Route power and signal wiring according to the equipment installation documentation.
- Where shielded wiring is used, terminate cable shields according to the system grounding design to reduce electrical interference.
- Keep field wiring separated from high-power switching conductors where practical.
- Inspect connectors and mounting points for contamination, corrosion, or physical damage before commissioning.
- After installation, perform the applicable Mark VIe system diagnostic and functional checks.
