Overview
The GE IS200AEPCH1A, also cataloged as the IS200AEPC Board Assembly, operates as a dedicated hardware component for pitch control and associated signal processing within GE Mark VI and Mark VIe control system platforms. The board supports application-specific electrical interfacing and control functions. Moreover, its conformal-coated circuit assembly provides environmental protection against moisture, dust, and other industrial contaminants.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200AEPCH1A |
| Base Model | IS200AEPC |
| Brand | GE |
| Manufacturer | General Electric |
| Series | Mark VI / Mark VIe |
| Product Type | Board Assemblies |
| Functional Acronym | AEPC |
| Primary Function | Alternative Energy Pitch Center and application-specific control support |
| Hardware Format | Printed Circuit Board Assembly |
| Protective Coating | Conformal Coated |
| Application | Pitch control, turbine management, automation, and associated electrical interfacing |
| Origin | USA |
| Operating Temp | -30 deg C to +65 deg C |
| Mounting Environment | Mark VI / Mark VIe system hardware configuration |
GE Backplane Communication and Firmware Compatibility
The IS200AEPCH1A operates as part of an integrated GE control hardware environment where board-level communication depends on the installed system architecture and associated interface hardware. Therefore, the board should only be installed in a configuration that matches the applicable rack, connector, and control subsystem requirements.
Firmware and hardware compatibility must also be verified against the installed Mark VI or Mark VIe system configuration. In addition, replacement boards should be checked for the correct model number, revision level, connector arrangement, and application assignment before energizing the control system.
Frequently Asked Questions
Q: Can the IS200AEPCH1A be installed as a hot-swappable board?
A: The available technical data does not specify hot-swap capability. Therefore, installation or replacement should follow the applicable GE system maintenance procedure and site power isolation requirements.
Q: Does the IS200AEPCH1A have a specified power consumption value?
A: No specific power consumption value is provided in the available technical data. The associated system documentation should be checked before calculating rack or power supply loading.
Q: Is IS200AEPCH1A interchangeable with other AEPC revisions?
A: Interchangeability cannot be confirmed from the available data alone. The full model number, hardware revision, connector configuration, and installed control application should be verified before replacement.
Field Installation Guidelines
- Disconnect or isolate system power according to the applicable maintenance procedure before removing or installing the board.
- Verify that the installed board model is IS200AEPCH1A and confirm the required revision before connection.
- Observe electrostatic discharge precautions when handling the printed circuit board assembly.
- Inspect board connectors and mating hardware for bent contacts, contamination, or mechanical damage.
- Ensure that the board is fully seated in its designated hardware position before securing any retaining hardware.
- Route associated wiring according to the system wiring diagram and keep signal wiring separated from high-energy conductors where applicable.
- Maintain the specified shielding and grounding practices for connected signal circuits.
- Do not modify the conformal coating or apply unapproved cleaning agents to the circuit assembly.
- Verify the complete control system configuration after installation before returning the equipment to service.
