Overview
Configured for converting digital control commands into analog current signals in Yokogawa CENTUM VP and CENTUM CS 3000 systems, the Yokogawa AAI543-S00/A4S00 (AAI543 Analog Output Module) provides direct electrical signal execution. The module supplies 16 isolated analog output channels with 4-20 mA DC signals for connection to industrial field devices. The AAI543-S00/A4S00 configuration includes the specified pressure clamp terminal block option and supports dual-redundant system arrangements.
Suffix Breakdown & Model Matrix
| Code | Specification |
|---|---|
| AAI543 | Analog Output Module |
| -S00 | Standard-type module configuration |
| /A4S00 | Pressure clamp terminal block option for analog connections |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | AAI543-S00/A4S00 |
| Base Model | AAI543 |
| Brand | Yokogawa |
| Product Type | Analog Output Module |
| System Compatibility | CENTUM VP and CENTUM CS 3000 |
| Origin | Japan |
| Number of Output Channels | 16 channels |
| Channel Isolation | Isolated output channels |
| Output Signal | 4-20 mA DC |
| Allowable Load Resistance | 0-750 ohm |
| Output Accuracy | +/-48 uA |
| Data Update Period | 10 ms |
| Circuit-Open Detection | Less than 0.65 mA |
| Temperature Drift | +/-16 uA per 10 deg C |
| Withstanding Voltage | 1500 VAC between output and system for 1 minute |
| Power Consumption | 230 mA at 5 VDC; 540 mA at 24 VDC maximum current consumption |
| Redundancy | Supports dual-redundant configuration |
| Terminal Block | Pressure clamp terminal block |
| HART Communication | Standard -S type focuses on standard analog output; HART availability depends on the specific module version |
| Operating Temp | 0 to +60 deg C in standard node units |
| Weight | Approx. 0.4 kg |
Process Control Signal Isolation
The AAI543-S00/A4S00 operates within a DCS analog output architecture using 4-20 mA DC field loops. Its isolated channel structure separates output circuits from the system side, while the specified 1500 VAC withstanding voltage supports electrical separation between output and system circuits.
In addition, the module updates output data every 10 ms and monitors circuit-open conditions below 0.65 mA. The 0-750 ohm allowable load range defines the supported resistive load characteristics for connected analog field devices.
The standard -S configuration focuses on conventional analog current output operation. Therefore, HART communication should not be assumed unless the exact module version explicitly identifies HART capability.
Frequently Asked Questions
Q: How many analog outputs does the Yokogawa AAI543-S00/A4S00 provide?
A: The module provides 16 isolated analog output channels. Each channel outputs a 4-20 mA DC control signal.
Q: What load resistance can each output circuit support?
A: The specified allowable load resistance is 0-750 ohm for the analog output circuit.
Q: What power supplies are required by the module?
A: The specified maximum current consumption is 230 mA at 5 VDC and 540 mA at 24 VDC. The actual system power arrangement should follow the applicable Yokogawa node and system configuration.
Field Installation Guidelines
Install the AAI543-S00/A4S00 only in a compatible Yokogawa CENTUM VP or CENTUM CS 3000 system assembly.
- Verify the module model and suffix configuration before installation.
- Isolate system power according to the applicable maintenance procedure before inserting or removing hardware.
- Connect analog output wiring to the specified pressure clamp terminal arrangement.
- Keep analog signal wiring separated from high-voltage and high-current power conductors where practical.
- Apply shield grounding according to the system cabinet and field wiring standard.
- Confirm field loop resistance remains within the specified 0-750 ohm range.
- Check output loop continuity during commissioning and investigate current levels associated with circuit-open detection.
- Verify redundant system configuration and switch-over behavior according to the installed CENTUM system architecture.
Emerson Top Products
| Emerson DeltaV | Epro | Ovation/Westinghouse |
| KJ1501X1-BC3 | 9100-00049-03 | 1C31122G01 |
| KJ3202X1-BA1 | A6110 | 1C31125G03 |
| KJ3222X1-BA1 | A6120 | 1C31232G01 |
| KJ3243X1-BA1 | A6125 | 1C31147G01 |
| KJ3002X1-BG1 | A6140 | 1B30035H01 |
| KJ3002X1-BB1 | A6210 | 1B30023H02 |
| KJ3001X1-BB1 | A6220 | 1B30023H01 |
| KJ3002X1-BC1 | A6312 | 1C31132G01 |
| KJ3002X1-BF1 | A6312/06 | 1C31129G03 |
| KJ3001X1-BJ1 | A6312/08 | 5X00119G01 |
Reviews
There are no reviews yet.