Overview
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | K9400FU |
| Brand | Yokogawa |
| Product Type | Gasket |
| Application | Industrial instrumentation sealing |
| Compatibility | Yokogawa equipment; exact assembly requires verification |
Mechanical Sealing Characteristics
The K9400FU functions as a mechanical gasket within its designated equipment assembly. Its primary function is to establish a sealing interface between mating surfaces.
During installation, technicians should verify the following conditions:
- Confirm the gasket part number against the equipment bill of materials.
- Inspect mating surfaces for contamination, scratches, or deformation.
- Check the gasket for visible damage before installation.
- Maintain the specified assembly orientation.
- Apply the equipment manufacturer’s prescribed fastening sequence and torque.
- Verify sealing integrity after assembly.
The supplied documentation does not establish a specific gasket material, pressure rating, chemical compatibility range, or temperature limit.
Frequently Asked Questions (FAQ)
Q: What is the function of the Yokogawa K9400FU?
A: The K9400FU is identified as a Yokogawa gasket. It provides a mechanical sealing interface within its designated equipment assembly.
Q: Can the K9400FU be used across different Yokogawa instrument platforms?
A: Compatibility depends on the equipment assembly and corresponding parts documentation. Verify the part number before installation.
Q: What are the specified operating temperature and gasket material?
A: The supplied information does not identify the material composition or operating temperature range. Consult the applicable equipment documentation for these parameters.
Field Installation Guidelines
- Isolate the equipment according to the applicable maintenance procedure before opening the assembly.
- Remove the existing gasket without damaging the mating surfaces.
- Clean the sealing interface and remove residual contamination.
- Inspect the replacement K9400FU for deformation, cracks, or surface damage.
- Position the gasket according to the equipment assembly drawing.
- Reassemble the mating components using the manufacturer’s specified fastening sequence.
- Verify mechanical seating and perform the applicable leak or sealing integrity check.
YOKOGAWA Top Products
| CPU | Power Supply and Battery | Rack |
| SCP451-51 | S9562FA | A1BD5D-06 |
| CP461-10 S1 | S9564FA | A1BR4D-05 |
| CP330D S3 | S9345FA | AKB337-M020 |
| CP461-50 S2 | S9548FA | NFBU200-015 |
| SCP451-53 | S9260DE-01 | NFBU200-S10 |
| SCP401-11 | S9971DB-0 | SNT411-13 |
| S2CP471-01 | S9681DB | SED2D-01 |
| CP451-51 | S9841DA | NFAF135-S00 |
| CP471-01 | SPW484-53 | NFAI835-S50 |
| CP461-53 | NFPW442-50 | NFAI543-H00 |
Customers Also Viewed
| Bently Nevada | ABB | GE Fanuc | Honeywell | Invensys |
|---|---|---|---|---|
| 330101-00-40-05-02-00 | PM591-2ETH | IS200ECTBG2A | CC-TDIL11 | FBM223 |
| 330101-00-40-10-02-00 | PM595-4ETH-F | IS200EPCTG1AZZ | CC-IP0101 | FBM207b |
| 330101-00-40-10-02-05 | DX522 | IS200VRTDH1DAA | CC-PAIX01 | FBM206 |
| 330101-00-43-15-02-05 | AX521 | IS200ERIOH1ACB | CC-TCNT01 | FBM237 |
| 330101-00-52-15-02-05 | AX522 | IS200ERQCH1A | CC-TAOX01 | FBM217 |
| 330101-00-55-05-02-05 | DI524 | IS200EACFG1BAA | CC-PDIS01 | FBM215 |
| 330101-00-55-10-02-05 | DI561 | IS200TVIBH2B | CC-PAIX01 | FBM211 |
| 330101-00-67-10-12-CN | DI562 | IS415UCVGH1A | CC-PAIH01 | FBM207 |
| 330101-00-75-15-02-05 | DI571 | IS200JPDDG1AAA | CC-PUIO31 | FBM223 |
| 330101-00-79-15-02-05 | DI581-S | IS200SPROH1ADD | CC-TAIX51 | FBM231 |
Reviews
There are no reviews yet.