Overview
The DS200SLCCG1AHH is a LAN Communication Card manufactured by General Electric (GE) for the Mark V Speedtronic control system. It provides LAN communication functions and mounts directly onto the SDCC module within the Mark V drive assembly. The board also features a 16-digit alphanumeric display, which remains visible after installation beneath the SDCC cover.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | DS200SLCCG1AHH |
| Brand | General Electric (GE) |
| Series | Mark V Speedtronic |
| Product Type | LAN Communication Card |
| Functional Acronym | SLCC |
| Assembly Type | Normal Assembly |
| Revision Quantity | 3 Revisions |
| Display | 16-digit alphanumeric display |
Communication and Mounting
The DS200SLCCG1AHH mounts onto the SDCC module inside the Mark V drive assembly. A ribbon cable connects the two boards through the KPPL connector on the SLCC card. Furthermore, the SDCC cover fits over the installed communication card while leaving its 16-digit display accessible for viewing.
The display assembly also includes four protective pins around the glass surface. These pins prevent excessive pressure on the display cover and do not function as electrical jumpers.
Hardware Configuration
The board contains several types of electronic components that support its circuit functions, including:
- Resistors and resistor network arrays
- Diodes
- Capacitors
- Berg-type jumpers
- Wire jumpers
- 16-digit alphanumeric display
Meanwhile, the Berg-type and wire jumper configurations determine specific board settings. Technicians should check the applicable Mark V documentation before changing jumper positions.
Replacement and EPROM Requirements
When replacing a DS200SLCCG1AHH, match the complete part number and revision configuration with the existing board. This is particularly important because the source information identifies two H-rated revisions with different revision functions: one functional revision and one artwork revision. These revisions are not considered backward-compatible.
The DS200 version typically does not include the U6 and U7 software EPROMs. Therefore, technicians may need to transfer both EPROMs from the existing board to the replacement board. Check the installed EPROM configuration before ordering to ensure the replacement meets the system’s requirements.
Frequently Asked Questions
Q: Does the DS200SLCCG1AHH include the U6 and U7 EPROMs?
A: Typically, no. The DS200 version generally ships without the U6 and U7 software EPROMs. In most replacement situations, technicians transfer these components from the original board to the replacement.
Q: How does the DS200SLCCG1AHH connect to the SDCC module?
A: The card mounts directly onto the SDCC module and connects through a ribbon cable attached to the KPPL connector on the SLCC board.
Q: Are the two H-rated revisions interchangeable?
A: No. The source information identifies one functional revision and one artwork revision. These revisions are not considered backward-compatible, so verify the complete revision configuration before replacement.
