DeltaV Emerson VE4003S2B1 Series 2 Analog Input Card

Hardware Specifications

4-20 mA HART Process Signal Integration

The VE4003S2B1 processes analog current loop signals from field transmitters and transfers measurement data through the DeltaV I/O architecture. Additionally, the integrated HART communication channel allows digital device information exchange without interrupting the primary 4-20 mA measurement loop.

The module supports process variables including pressure, temperature, flow, and level measurements. Furthermore, channel-to-bus isolation separates field signal circuits from internal system communication paths to reduce electrical interference during operation.

The HART interface supports remote device configuration, diagnostics, and asset information transfer through compatible Emerson AMS Device Manager environments. Therefore, maintenance personnel can access transmitter status data through the DeltaV control network.

Frequently Asked Questions

Q: Does the VE4003S2B1 support standard 4-20 mA transmitters without HART communication?
A: Yes. The module accepts standard 4-20 mA DC analog input signals and also supports HART-enabled field devices for additional digital communication functions.

Q: How does the module provide electrical separation between field wiring and the DeltaV system?
A: The VE4003S2B1 uses channel-to-bus isolation to separate input signal circuits from the internal DeltaV communication bus.

Q: Can the VE4003S2B1 be installed in any DeltaV carrier position?
A: Installation requires a compatible DeltaV I/O carrier configuration. The module uses keyed insertion features to prevent incorrect module placement.

Field Installation Guidelines

Install the VE4003S2B1 on an approved Emerson DeltaV I/O carrier with proper DIN rail mounting support. Verify that the carrier and backplane connections are clean before module insertion.

Connect field transmitters using appropriate shielded instrumentation wiring practices. Terminate cable shields according to the site grounding standard to minimize electromagnetic interference.

Separate analog signal wiring from high-voltage power cables and switching circuits. Maintain correct polarity for 4-20 mA loop connections before applying system power.

Confirm DeltaV controller recognition and module configuration after installation. Verify input scaling, channel assignment, and HART communication status through the DeltaV engineering workstation.

Emerson Top Products