Overview
The Honeywell CC-TPOX01 51306528-175, also cataloged as the CC-TPOX01 Control Output Module, provides electrical output interfacing within a distributed control system (DCS). Its documented parameters include a 24 VDC supply with a tolerance of +/-10%, 16-bit resolution, and specified isolation ratings between channels and the bus. The available data lists 8 or 16 channels; the exact channel count requires confirmation for the supplied hardware variant.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CC-TPOX01 |
| Spare Model | 51306528-175 |
| Brand | Honeywell |
| Product Type | Control Output Module |
| Origin | USA |
| Weight | 0.4 kg |
| Dimensions | 19.1 x 18.8 x 6.5 cm |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | Not specified |
| Supply Voltage | 24 VDC +/-10% |
| Channel Count | 8 or 16 |
| Resolution | 16-bit |
| Accuracy | +/-0.1% of full scale |
| Channel-to-Channel Isolation | 250 VAC minimum |
| Channel-to-Bus Isolation | 500 VAC reinforced isolation |
| Humidity | 0-95% RH, non-condensing |
| Tariff Code | 8537101190 |
Process Control Output and Electrical Isolation
The supplied specifications identify separate channel-to-channel and channel-to-bus isolation ratings. These ratings describe different electrical isolation boundaries and should not be treated as interchangeable. The stated 250 VAC minimum and 500 VAC reinforced isolation values require verification against the manufacturer’s documentation for this exact model before they are used for system insulation coordination.
The listed 16-bit resolution and +/-0.1% full-scale accuracy describe signal performance parameters. The available data does not identify the output signal range, supported load impedance, output update rate, or specific field wiring configuration. These values should be confirmed before connecting field devices or configuring control logic.
Frequently Asked Questions (FAQ)
Q: What supply voltage does the CC-TPOX01 require?
A: The supplied data specifies 24 VDC with a tolerance of +/-10%. Confirm the applicable power connection and current demand in the manufacturer’s installation documentation.
Q: What are the specified isolation ratings?
A: The supplied data lists at least 250 VAC channel-to-channel isolation and 500 VAC reinforced channel-to-bus isolation. Verify these ratings and their test conditions against the official hardware documentation before commissioning.
Q: Does the CC-TPOX01 have 8 or 16 channels?
A: The provided information lists both configurations without identifying the exact hardware variant. Confirm the channel count from the product label, assembly documentation, or applicable Honeywell hardware manual.
Field Installation Guidelines
- Verify the complete model number and spare part number against the installed system configuration before mounting or replacement.
- Confirm the module’s approved chassis position, terminal assignments, and backplane compatibility using the applicable Honeywell documentation.
- Verify the supply polarity and ensure the DC source remains within the specified 24 VDC +/-10% range.
- Route field signal wiring separately from high-voltage power conductors to reduce electrical interference.
- Apply cable shielding and grounding according to the manufacturer’s instructions and the plant grounding design.
- Confirm the required output signal type, field load limits, channel count, and isolation requirements before connecting external equipment.
- Inspect terminal connections and verify that the module is correctly seated before energizing the system.
- Follow the system’s approved isolation and shutdown procedures when installing or replacing the module. Do not assume hot-swap capability without explicit manufacturer confirmation.
Reviews
There are no reviews yet.