NewSale
Yokogawa APM11 Pulse Input Module
Yokogawa APM11 Pulse Input Module Original price was: $520.00.Current price is: $415.00.
ASD143-P00 Yokogawa Digital Input Module
ASD143-P00 Yokogawa Digital Input Module Original price was: $520.00.Current price is: $415.00.

Yokogawa ARM15A-000 Relay Board is available as Brand New Original Stock. It supports CENTUM VP FIO digital contact input applications with Global Shipping.

10 in stock

Sku:ARM15A-000

10 in stock

Overview

Configured for mechanical contact signal interfacing in CENTUM VP FIO subsystems, the Yokogawa ARM15A-000 (ARM15A Relay Board) provides direct electrical connection between digital input modules and field contact devices.

Hardware Specifications

ParameterSpecification
ModelARM15A-000
BrandYokogawa Electric Corporation
Product TypeRelay Board
ApplicationFIO subsystem relay input interface for CENTUM VP
Relay FunctionMechanical relay contact input
Contact Points32 points
Field Device TerminalsM4 screw terminals
Compatible ModulesADV151 (DI: 32 points) + ATD5A terminal block; ADV161 (DI: 64 points)
Signal CablesAKB331 for 32-point connection; AKB337 for 64-point connection
Contact Input SignalON signal: 150 ohm or less; OFF signal: at least 200 kohm
External Contact Rating24 VDC, 13 mA minimum load
Power Supply Voltage24 VDC
Power ConsumptionMax. 0.32 A internal circuit consumption
Field Device Power SupplyExternal dual-line supply, 24 VDC max. 0.3 A per line for each 16-point group
Insulation ResistanceAt least 10 Mohm at 500 VDC
Withstanding VoltageField terminals to case: 1.5 kV; 24 V power terminals to case: 500 V; 24 V power terminals to field terminals: 1.5 kV
Operating Temp0 to 50 deg C
Operating Humidity10 to 90% RH
DimensionsW: 482.6 mm x H: 132.5 mm (3U)
Weight2.2 kg
Mounting Type19-inch rack mountable
StandardsEMC standards, CE Marking, C-Tick Marking

Yokogawa DCS Relay Interface and Signal Isolation Characteristics

The ARM15A-000 operates as a mechanical relay contact input board within the Yokogawa CENTUM VP FIO architecture. It receives dry contact signals or voltage input signals from field devices and transfers these signals to digital input modules.

Furthermore, the relay interface supports single or dual-redundant digital input configurations. The board provides electrical separation between field wiring and FIO digital input modules through relay contact structures.

For Yokogawa process control installations, the relay board supports channel-to-channel isolation requirements for discrete signal handling. However, it does not process analog loops such as 4-20 mA HART or FOUNDATION Fieldbus signals because it is designed specifically for digital contact input applications.

Frequently Asked Questions

Q: What type of field signals does the ARM15A-000 accept?
A: The ARM15A-000 accepts mechanical dry contact input signals and voltage-based contact input signals for FIO digital input modules.

Q: Can the ARM15A-000 support redundant digital input configurations?
A: Yes. The relay board supports single and dual-redundant digital input module configurations when connected with compatible CENTUM VP FIO modules.

Q: Does the ARM15A-000 require an external power supply for field devices?
A: Yes. The field device power supply requires an external 24 VDC source with dual-line distribution for each 16-point section.

Field Installation Guidelines

  • Install the ARM15A-000 inside the specified 19-inch rack system and secure the module using the appropriate mounting hardware.
  • Connect field device wiring to the M4 screw terminals according to the assigned contact input channels.
  • Separate field signal cables from high-voltage power cables to reduce electrical interference.
  • Connect cable shields according to the plant grounding standard and avoid multiple grounding points on signal circuits.
  • Verify contact polarity, external 24 VDC supply wiring, and terminal assignments before system commissioning.
  • Confirm that connected digital input modules match the supported ADV151 or ADV161 module configurations.

Emerson Top Products

Emerson DeltaVEproOvation/Westinghouse
KJ1501X1-BC39100-00049-031C31122G01
KJ3202X1-BA1A61101C31125G03
KJ3222X1-BA1A61201C31232G01
KJ3243X1-BA1A61251C31147G01
KJ3002X1-BG1A61401B30035H01
KJ3002X1-BB1A62101B30023H02
KJ3001X1-BB1A62201B30023H01
KJ3002X1-BC1A63121C31132G01
KJ3002X1-BF1A6312/061C31129G03
KJ3001X1-BJ1A6312/085X00119G01

Customers Also Viewed

Bently NevadaABBYokogawaWoodwardSchneider
133835-02SPDSM04CP451-105463-785140CPU65150
135321-01SPIEET800CP4615437-672BMEXBP0400
135322-01SPINIET800CP461-509907-175140CPU67160
136751-01SPNLK01CP451-115466-355170FNT11001
136751-02SPSED01CP701 S15466-257170ADO34000
184139-10SPSEM11CP345 S15466-1049170ADM35010
82362-01SPSET01SCP461-11 S15501-381170ADI34000
84134-01SPTKM01CP451-10 S28200-177140ARI03010
87900-02SPTPS02CP401-108200-205BMXCPS4002
89998-01SPTPS13NFCP100-S009907-029140CRP93200

 

 

Contact: Manski Wong +86 18030205725 manski@cambia.cn

Weight2.2 kg
Dimensions482.6 × 132.5 mm
Country Of Origin

Sweden

Condition

Brand New with Factory Sealed

Payment

T/T

Warranty

12 Months

Shipping Port

Xiamen

Reviews

There are no reviews yet.

Be the first to review “ARM15A-000 Relay Board Yokogawa”

Your email address will not be published. Required fields are marked *

Back to Top